Have you ever found yourself driving down the road, only to realize that your side mirror glass is cracked or broken? It can be a frustrating and dangerous situation, as it can make it difficult to see behind you. Luckily, replacing side mirror glass is a relatively easy and inexpensive repair that you can do yourself. In this article, we will provide you with step-by-step instructions on how to change side mirror glass. With a few simple tools and a little bit of time, you can have your side mirror up and running again in no time.
Before you begin, you will need to gather a few supplies. You will need a new side mirror glass, a screwdriver, and a putty knife. You may also want to wear gloves to protect your hands. Once you have gathered your supplies, you can begin the repair process. First, you will need to remove the old side mirror glass. To do this, simply use the screwdriver to remove the screws that are holding the glass in place. Once the screws are removed, you can carefully pry the glass off of the mirror.
Once the old glass is removed, you can install the new glass. To do this, simply align the new glass with the mirror and press it into place. Once the glass is in place, you can use the screwdriver to tighten the screws. Be sure to tighten the screws securely, but do not overtighten them. Once the screws are tightened, your side mirror repair is complete. You can now test the mirror to make sure that it is working properly.
Removing the Old Mirror Glass
Replacing a damaged side mirror glass can be a relatively simple task that most car owners can perform with the right tools and a little patience. However, it is important to follow the steps carefully to avoid causing further damage to the side mirror assembly.
Safety Precautions
Before you begin, there are a few safety precautions you should take:
– Wear gloves to protect your hands from broken glass.
– Park the car on a flat, stable surface and engage the parking brake.
– Disconnect the negative battery terminal to prevent any electrical shocks.
Gathering Tools and Materials
You will need the following tools and materials:
| Tool or Material |
|---|
| Replacement side mirror glass |
| Flat-head screwdriver or trim removal tool |
| Phillips screwdriver |
| Clean cloth |
Removing the Old Mirror Glass
Now that you have gathered your tools and materials, you can follow these steps to remove the old side mirror glass:
- Locate the adjustment screws. Most side mirrors have two or three adjustment screws located on the back of the mirror housing. These screws allow you to adjust the mirror’s position.
- Loosen the adjustment screws. Use a Phillips screwdriver to loosen the adjustment screws, but do not remove them completely.
- Gently pry the old mirror glass off the housing. Use a flat-head screwdriver or a trim removal tool to carefully pry the old mirror glass off the housing. Be careful not to damage the housing or the electrical wires connected to the mirror.
- Clean the mirror housing. Once the old mirror glass is removed, use a clean cloth to wipe away any debris or dirt from the mirror housing.
Aligning and Mounting the New Glass
Now that you have removed the old glass, it’s time to align and mount the new glass onto the mirror arm. Carefully place the new glass over the mirror arm, ensuring that it is facing the correct direction.
Once the glass is aligned, apply a small amount of adhesive to the back of the glass or the mirror arm. This adhesive will help to keep the glass in place.
Press the glass firmly onto the mirror arm, ensuring that it is fully seated. Hold the glass in place for a few seconds to allow the adhesive to set.
Wipe away any excess adhesive from the edges of the glass, and you’re done! Your side mirror glass is now replaced, and you can enjoy clear visibility while driving.
How To Change Side Mirror Glass
Replacing a broken side mirror glass is a simple and inexpensive task that can be completed in under an hour. Here’s a step-by-step guide on how to do it:
- Gather your materials. You will need a new side mirror glass, a screwdriver, and a putty knife.
- Remove the old side mirror glass. Use the screwdriver to remove the screws that hold the glass in place. Then, carefully pry the glass off the mirror using the putty knife.
- Clean the mirror frame. Use a damp cloth to clean the mirror frame and remove any dirt or debris.
- Install the new side mirror glass. Place the new glass in the mirror frame and align it with the screws. Then, tighten the screws to secure the glass in place.
- Test the side mirror. Adjust the side mirror so that it provides you with a clear view of the road behind you.
People also ask:
How much does it cost to replace side mirror glass?
The cost to replace side mirror glass will vary depending on the make and model of your car. However, you can expect to pay between $20 and $100 for a new side mirror glass.
Can I replace side mirror glass myself?
Yes, you can replace side mirror glass yourself. However, if you are not comfortable doing it yourself, you can take your car to a mechanic and have them do it for you.
How long does it take to replace side mirror glass?
It should take you less than an hour to replace side mirror glass. However, the time it takes will vary depending on the make and model of your car.
